Special slewing deceleration products derived from slewing bearing products, high height, large deceleration ratio, simple structure, easy to use and maintain in the slewing drive process. The inner and outer rings of the slewing bearing are used because the slewing bearing is used as the base of the follower and the frame. The input and output of the driving force are realized separately, so the slewing drive can not only realize 360 degree whole circle rotation without dead point, but also can install the driving power source on the basis of the slewing support frame, so its transmission efficiency is high and it is a mechanical transmission device. New members. Because it is actually a reducer, it can also be called a rotary reducer, a slewing disc reducer or a drive turntable.

As we all know, whether the slewing drive is faulty can be distinguished from the rolling sound of the turntable bearing. If such problems occur during use, the normal work is delayed, and there is a great risk to the staff. Therefore, detailed inspections are required before use to prevent unnecessary failures.

Slewing drives typically employ either a spur gear or a worm gear to achieve rotation. Spur Gear drives are used for high rotational speeds and quick acceleration at nominal-to-low torque loads. Worm gear drives, on the other hand, are slower in speed but can magnify an input torque at much higher ratios than a typical spur gear system. This article will introduce how to install slewing drive.

The slewing drive is an important part used in many construction machinery nowadays, because of its utilization rate and importance, so it will be damaged in use. As a key part of the main engine, whether the rotary drive device can work properly is related to the performance of the main engine. The cold winter weather will have a certain impact on the normal operation of the slewing drive. For users, it is important to prevent damage of slewing drive, so how to extend the life of slewing drive?

In the practical application of slewing drive, many times due to the improper method of user in the process of installation, use and maintenance, the slewing drive can not be used properly, which makes the performance of the main engine decline. Therefore, we should pay enough attention to the installation, use and maintenance of rotary drive. Today, we analyze some detail factors that can not be ignored in the correct installation of slewing drive, so that the slewing drive in the installation process to play the maximum performance.

The slewing reducer is an upgraded product of the slewing bearing, usually composed of a worm, turbine slewing bearing, housing, and power source. The shell is made of high-quality cast steel and has very high strength. The worm gear and worm gear are made of 42CrMo and lightened by glow ions. The wear resistance strength is higher than that of the domestic traditional gas nitrided 50Mn material. Stronger than hardness and longer service life. This product can be used in mechanical equipment such as flatbed trucks, wooden cranes, single-column cranes, beam lifting machines, truck-mounted cranes, aerial work vehicles, solar-tracking solar energy, automation equipment, etc.; in the solar photovoltaic power generation industry, slewing drive devices are generally equipped DC planetary gear motors or AC gear motors are mainly used; hydraulic motors are mainly used as power drive systems on construction machinery.