Publish Time: 2020-10-29 Origin: Site
Slewing drive is a new type of slewing product, usually also called slewing bearing. The main components of the slewing drive are: worm, slewing bearing, motor, casting base and some standard parts such as bearings and bolts. Since the core component uses a turntable bearing (slewing bearing), it can bear axial force, radial force and overturning moment at the same time. The rotary drive uses wheel and axle movement to reduce the force consumption and play a role in safety protection. Compared with the traditional rotary products, the slewing drive has the characteristics of simple installation, easy maintenance, and greater installation space saving.
· Basic technology of slewing drive
· Features of slewing drive
· Application range of slewing drive
Special rotary deceleration products derived from slewing bearing products with high height and large reduction ratio, simple structure, and convenient use and maintenance during slewing drive. Due to the use of slewing bearings as the follower and frame foundation, the inner and outer rings of the slewing bearings are used The input and output of the driving power are realized separately, so that the slewing drive can not only realize the 360-degree rotation of the entire circumference without dead point, but also can install the driving power source on the basis of the slewing support frame, so its transmission efficiency is high, and it is a family of mechanical transmission devices. New member in. Because it is actually a deceleration device, it can also be called a slewing reducer, turntable reducer, or drive turntable.
1. A large transmission ratio can be obtained, which is more compact than the staggered shaft helical gear mechanism.
2. There is line contact between the meshing tooth surfaces of the two wheels, and its load carrying capacity is much higher than that of the staggered-shaft helical gear mechanism.
3. Worm drive is equivalent to helical drive. It is a multi-tooth mesh drive, so the transmission is stable and the noise is very low.
4. Self-locking of rotary drive. When the lead angle of the worm is less than the equivalent friction angle between the teeth of the meshing gears, the mechanism is self-locking, which can realize reverse self-locking.
5. The rotary drive transmission has low efficiency and serious wear. When the worm gear is driven, the relative sliding speed between the gear teeth is large, so the friction loss is large and the efficiency is low. And in order to dissipate heat and reduce wear, more expensive materials are often used, so the cost is higher.
Slewing drives are mainly used in many industries such as special vehicle steering tables, heavy-duty flatbed trucks, container cranes, truck mounted cranes, truck cranes, aerial work trucks, gantry cranes, small wind power stations, aerospace communications, satellite reception, solar tracking systems, and many other industries. . Especially in recent years, the rapidly developing solar photovoltaic power generation industry has been widely used. Slewing drive is used in solar photovoltaic power generation industry, generally equipped with slewing gear motor or AC gear motor; hydraulic motor is mainly used as power drive on construction machinery.