Special slewing deceleration products derived from slewing bearing products, high height, large deceleration ratio, simple structure, easy to use and maintain in the slewing drive process. The inner and outer rings of the slewing bearing are used because the slewing bearing is used as the base of the follower and the frame. The input and output of the driving force are realized separately, so the slewing drive can not only realize 360 degree whole circle rotation without dead point, but also can install the driving power source on the basis of the slewing support frame, so its transmission efficiency is high and it is a mechanical transmission device. New members. Because it is actually a reducer, it can also be called a rotary reducer, a slewing disc reducer or a drive turntable.

The slewing drive is a gear box with the ability to withstand radial and axial loads and transfer high rotating torque. these mechanisms produce rotational motion along a single axis or multiple combination axes. Slewing drives are designed to handle radial or axial loads using high rotating torque.

As we all know, whether the slewing drive is faulty can be distinguished from the rolling sound of the turntable bearing. If such problems occur during use, the normal work is delayed, and there is a great risk to the staff. Therefore, detailed inspections are required before use to prevent unnecessary failures.

Only in strict compliance with the correct operating procedures to ensure the operation characteristics of slewing drive. The following article contains the information required for proper maintenance of the slewing driver, and all of the following work steps require professional action. Failure to comply will affect the durability of the bolt connection, the function and service life of the slewing drive.

The slewing drive is an important part used in many construction machinery nowadays, because of its utilization rate and importance, so it will be damaged in use. As a key part of the main engine, whether the rotary drive device can work properly is related to the performance of the main engine. The cold winter weather will have a certain impact on the normal operation of the slewing drive. For users, it is important to prevent damage of slewing drive, so how to extend the life of slewing drive?

How to choose the right slewing drive?A slewing drive is a gearbox designed to handle radial or axial loads using high rotational torque. In addition, the slewing ring bearing, at the heart of the drive, enables it to withstand high overhung or moment loads. A descendant of the “worm” screw, slewing