You are here: Home » News » Industry news » The Correct Storage Method For Slewing Bearing

The Correct Storage Method For Slewing Bearing

Views:24     Author:Site Editor     Publish Time: 2017-04-08      Origin:Site

Slewing rings are coated with anti-rust oil , and wrapped with a film in the factory. Such a package is usually valid for 3-6 months antirust.As long as the relative humidity does not exceed 60% of the storage compartment , the temperature changes within(20 ± 10), slewing ring general can store about a year (in the original packaging in good condition ) .

After long-term storage , grease lubricating properties of slewing bearings' raceway filled may reduce.Before using the slewing bearing,they need to be filled with a new grease filling, storeroom should also avoid vibration and shaking.

For slewing rings ( turntable bearings ) not stored in their original packagings they should be kept well, to protect against corrosion and contamination .

For large slewing rings should be on flat, and inner and outer rings both should be supported. It should be stacked flat isolation between slewing rings.

 


Xuzhou WanDa Slewing Bearing Co.,Ltd.
One More Choice For You!
Xuzhou WanDa Slewing Bearing Co.,Ltd.
 No.15,Huaxia Road,the 3rd Industrial Park,Tongshan District, Xuzhou, Jiangsu,China.
  +86-516-83309366     +86-516-83303986
   info@slew-bearing.com
  +86-133-37939399   +86-180 2053 7858

Home

Copyright © 2017 Xuzhou WanDa Slewing Bearing Co.,Ltd.  All rights reserved.