You are here: Home » products » SLEWING BEARING » Slewing Ring Bearing With Internal Gear » Small Diameter Slewing Ring Bearing Soft Zone Position
Share to:

Small Diameter Slewing Ring Bearing Soft Zone Position

5 0 Reviews
A slewing bearing or slew[ing] ring is a rotational rolling-element bearing or plain bearing that typically supports a heavy but slow-turning or slow-oscillating load, often a horizontal platform such as a conventional crane, a swing yarder, or the wind-facing platform of a horizontal-axis windmill. (To "slew" means to turn without change of place.)
Compared to other rolling-element bearings, slewing bearings are thin in section and are often made in diameters of a metre or more; the slewing bearings on the Falkirk Wheel are 4 metres diameter and fit over a 3.5 metre axle. Slewing bearings resemble oversize aircraft control surface bearings.
  • XZWD

Small Diameter Slewing Ring Bearing with Internal Gear

Characteriestic of structure, performance and application

The single row four point contact ball slewing bearing is composed of two seat rings, which design in compact structure and light weight, steel ball contact with the circular raceway at four point, it can bear the axial force, radial force and the tlting moment at the same time.

It can be used for slewing conveyer, welding manipulator, light & medium duty crane, excavator, and other construction machinery.

Gear heat treatment

The statement of gear heat treatment normally have two statement, normfalizing and tempering. The quenching of gear surface an processed according to customer's requirement, the hardness are in the range of 50HRC~60HRC. In different application, the gear quenching can divide into whole tooth quenching and single tooth induction quenching, the latter one can divide into tooth surface & root quenching and tooth surface quenching.

Tooth surface quenchingTooth surface & root quechingWhole tooth quenching


1. n1 is the nos of lubricating holes.Oil cup M10×1JB/T7940.1~JB/T7940.2.The Oil nipple's location can be change according to the user's application.

2. n-φcan change to tapped hole,the diameter of tapped hole is M,depth is 2M.

3. The tangential tooth force in the form is the max tooth force,the nominal tangential tooth force is 1/2 of the max one.

4. "K" is addendum reduction coefficient.


Recent News

Xuzhou WanDa Slewing Bearing Co.,Ltd.
One More Choice For You!
Xuzhou WanDa Slewing Bearing Co.,Ltd.
 Add: No.8,Dianchang North Road,High-tech Industrial Development Zone,Xuzhou City,Jiangsu Province,China.
  丨 +86-180 2053 7858